GAS EQUIPMENT ENGINEERING CORP. -- DESICCANT -- 6850-01-036-9625
===================== Product Identification =====================
Product ID:DESICCANT
MSDS Date:01/01/1987
FSC:6850
NIIN:01-036-9625
=== Responsible Party ===
Company Name:GAS EQUIPMENT ENGINEERING CORP.
Address:1240 ORONOQUE ROAD
Box:2-237
City:MILFORD
State:CT
ZIP:06460-1728
Country:US
Preparer's Name:HMIS; DGSC-SSH
CAGE:96101
=== Contractor Identification ===
Company Name:GAS EQUIPMENT ENGINEERING CORP.
Address:1240 ORONOQUE ROAD-MAY BE OUT OF BUSINES
Box:2-237
City:MILFORD
State:CT
ZIP:06460-1728
Country:US
CAGE:96101
============= Composition/Information on Ingredients =============
Ingred Name:SILICA, AMORPHOUS, PRECIPITATED AND GEL
CAS:7699-41-4
RTECS #:VV8850000
Fraction by Wt: 99.0%
OSHA PEL:20 MPPCF
ACGIH TLV:10 MG/M3 TDUST; 9293
Ingred Name:UNIDENTIFIED COMPONENTS
Fraction by Wt: 01.0%
===================== Hazards Identification =====================
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:DUST MAY BE IRRITATING WHEN INHALED.
DRYING ACTION OF MATERIAL CAN IRRITATE THE MUCOUS MEMBRANES OF THE
NOSE, THROAT.
Effects of Overexposure:DRYING ACTION OF MATL CAN IRRIT OF MUCOUS
MEMBRANE OF NOSE, THROAT, & SKIN. NO OTHER HEALTH HAZ KNOWN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
======================= First Aid Measures =======================
First Aid:SKIN: WASH W/ SOAP & H*2O. EYES: FLUSH W/ H*2O. INGESTED:
DON'T INDUCE VOMITING. INHALED: REMOVE TO FRESH AIR. GIVE
CPR/OXYGEN IF NEEDED. KEEP WARM & QUIET. REMOVE CONTAMINATED
CLOTHING. NEVER GIVE AN YTHING BY MOUTH TO UNCONSCIOUS PERSON.
===================== Fire Fighting Measures =====================
Flash Point:NONE
Extinguishing Media:EXTINGUISH WITH AGENT SUITABLE FOR SURROUNDING FIRE
Fire Fighting Procedures:WEAR SELF-CNTD BRTHG APP. H*20 SPRAY TO COOL
CONTRS. SUBJECTED TO SURROUNDING FIRE.
Unusual Fire/Explosion Hazard:NONE NOTED BY MANUFACTURER.
================== Accidental Release Measures ==================
Spill Release Procedures:USE APPROPRIATE PROTECTIVE EQUIPMENT IF NEEDED
DURING CLEAN-UP PROCEDURES; SWEEP OR VACUUM UP DRY MATERIAL & PLACE
IN COVERED CONTAINER. FLUSH AREA WITH LG QTY OF WATER. SM SPILLED
QTY MAY BE FLUSH TO SEWER.
====================== Handling and Storage ======================
Handling and Storage Precautions:KEEP CONTAINERS CLOSED TIGHT TO AVOID
MOISTURE ABSORPTION BEFORE USE.
Other Precautions:AVOID TEMPERATURES ABOVE 600F AS THIS WILL DESTROY
DESICCANT PROPERTIES BUT WILL NOT INTRODUCE HAZARDS.
============= Exposure Controls/Personal Protection =============
Respiratory Protection:USE NIOSH/MESA APPD DUST RESP.
Ventilation:GENERAL VENTILATION
Protective Gloves:COTTON
Eye Protection:GOGGLES AS REQD.
Other Protective Equipment:LONG SLEEVES, CLOSE WEAVE COTTON GLOVES
Work Hygienic Practices:OBSERVE GOOD HOUSEKEEPING PRACTICES. WASH
BEFORE EATING.
Supplemental Safety and Health
================== Physical/Chemical Properties ==================
HCC:N1
Spec Gravity:2.1
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DRY WHITE GRANULES
================= Stability and Reactivity Data =================
Stability Indicator/Materials to Avoid:YES
HYDROGEN FLUORIDE.
Stability Condition to Avoid:NOT KNOWN
Hazardous Decomposition Products:NONE
==================== Disposal Considerations ====================
Waste Disposal Methods:DISPOSE IAW ALL LOCAL, STATE, FEDERAL LAWS &
REGS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.